Industrial News

Essential Installation Tips for Maximum Effectiveness

Where to Place Your Mosquito Trap? Master the 180cm Rule and 5 Strategic Locations for Better Results

To maximize your mosquito trap’s full potential, placement is even more critical than the model itself. In this guide, our experts share 5 essential installation tips to help you precisely intercept flying insects and create a pest-free environment.


Expert Secrets: 5 Keys to Maximizing Your Mosquito Trap’s Effectiveness

1. Intercept at Entry Points, Not the Impact Zone
Install traps along the path where insects enter (e.g., inside main entrances, near windows, or loading docks). Intercepting pests before they penetrate deeper into the facility is far more effective than placing traps directly next to workspaces or dining tables.

2. Avoid Competing Light Sources
UVA attraction relies on contrast. Avoid areas with direct sunlight or high-intensity daylight lamps. Mosquito traps are most effective in darker corners where the light source can stand out to insects.

3. Keep Away from Air Vents and AC Drafts
Flying insects are lightweight and easily deterred by strong airflows. Install units in areas with stable air currents to ensure pests can easily fly toward and be drawn into the lamp.

4. Replace Lamps Regularly (5,000 - 6,000 Hours)
The effective wavelength of UVA lamps diminishes over time. Even if the bulb still appears lit, its attraction power drops significantly after a year of use. We recommend regular replacement to maintain peak performance.

5. The "Golden Height": 180 - 200 cm
This is the most active flight zone for most insects. Mounting at this height also prevents direct light glare into human eyes and keeps the units out of reach of children, ensuring safety first.


Quick Reference: Correct vs. Incorrect Installation

# Restaurants
[X] Incorrect: Mounted directly next to dining tables (Attracts insects toward customers).
[O] Correct: Positioned in hallways leading to the kitchen or near back exits.

# Food Processing Plants
[X] Incorrect: Installed directly above production lines (Risk of debris falling into products).
[O] Correct: Mounted on walls at least 3 meters away from production areas.

# Retail Stores
[X] Incorrect: Facing floor-to-ceiling windows (Ineffective due to light competition).
[O] Correct: Placed at shelf corners or the inner side of the entrance.


WELL Electronic | 40 Years of Manufacturing Excellence